Expansion Pin Header Mechanical

Discussion of your EDM baseboard, your add-on boards or other peripherals for your wandboard.

Expansion Pin Header Mechanical

Postby proclivis » Thu Jan 02, 2014 5:01 am

Is there a mechanical drawing for the base board that includes spacing for the Expansion Pin Headers? I would like to design a board that plugs onto the 4 headers and don't want to rely solely on my own measurements.
proclivis
 
Posts: 2
Joined: Thu Jan 02, 2014 4:56 am

Re: Expansion Pin Header Mechanical

Postby Tapani » Mon Jan 06, 2014 3:49 am

Hello,

you can use either the 2D files in the downloads section on the WB homepage or this: http://www.wandboard.org/images/downloa ... ons-2d.pdf
Tapani
Site Admin
 
Posts: 705
Joined: Tue Aug 27, 2013 8:32 am

Re: Expansion Pin Header Mechanical

Postby raulina » Wed Oct 26, 2016 1:38 pm

Tapani wrote:Hello,

you can use either the 2D files in the downloads section on the WB homepage or this: http://www.wandboard.org/images/downloa ... ons-2d.pdf


THANK YOU. I have wasted more than 2 hours looking for this information, and thanks to you I found it. I can't belive it is not easily accesible from the from the wandboard website.
raulina
 
Posts: 15
Joined: Thu May 05, 2016 3:23 pm


Return to Hardware and peripherals

Who is online

Users browsing this forum: No registered users and 16 guests

cron