Wandboard Quad FEC MAC address

Discussion of your EDM baseboard, your add-on boards or other peripherals for your wandboard.

Wandboard Quad FEC MAC address

Postby alxpert » Thu Jul 20, 2017 5:52 pm

Can somebody confirm that the MAC address of the onboard FEC is stored in u-boot for Ubuntu images?
I'm asking this because if i create multiple SDcard from Ubuntu images, they all get the same MAC address.

Alex
alxpert
 
Posts: 1
Joined: Thu Jul 20, 2017 5:49 pm

Re: Wandboard Quad FEC MAC address

Postby ClayMontgomery » Fri Jul 21, 2017 3:55 pm

U-boot manages the MAC address that is given to Ubuntu to use.

You can change it with something like this at the u-boot prompt:
setenv ethaddr 00:1f:7b:b4:0e:01
saveenv

U-boot retrieves MAC addresses from the system ROM and efuses which are in the i.MX6 chip.
The ethaddr variable is stored on the sdcard along with the rest of the u-boot environment, since Wandboards do not have on-board flash memory.

However, not all OSes use the ethaddr variable.
For some, you may have to edit the networks interfaces file:
nano /etc/network/interfaces

This is more information here:
[url]
http://montgomery1.com/player-deployment/[/url]

Regards, Clay
ClayMontgomery
 
Posts: 87
Joined: Tue Nov 19, 2013 9:14 pm

Wandboard Quad FEC MAC address

Postby aishuechikki » Thu Aug 24, 2017 8:42 am

[U-Boot] Ethernet support broken for Wandboard Quad on master ... serial Err: serial Net: FEC [PRIME] Warning: FEC using MAC address from net device Hit any ...
aishuechikki
 
Posts: 1
Joined: Thu Aug 24, 2017 8:40 am


Return to Hardware and peripherals

Who is online

Users browsing this forum: No registered users and 15 guests