e-CAM51IMX6 - 5MP MIPI iMX6 Wandboard Camera

Discussion of your EDM baseboard, your add-on boards or other peripherals for your wandboard.

e-CAM51IMX6 - 5MP MIPI iMX6 Wandboard Camera

Postby erics » Thu Dec 01, 2016 12:33 pm

e-CAM51IMX6 is a camera daughter board designed by e-con systems for the Wandboard - NXP®/Freescale® iMX6 Processor based Single Board Computer. e-CAM51IMX6 wandboard camera uses a 5 Mega Pixel auto focus camera module based on OmniVision’s OV5640 CMOS image sensor and is interfaced to i.MX6 CPU through MIPI® CSI-2 Interface.

Image
Wandboard Camera Key Features:
Houses e-CAM57_MI5640_MOD - 5.0 MP Auto Focus MIPI Camera Module
Plugs in to Wandboard - NXP®/Freescale® iMX6 based SBC via 33-pin Flex cable
Linux camera driver (V4L2)

https://www.youtube.com/watch?v=ixtSAx9h5Us
Last edited by erics on Thu Dec 15, 2016 9:28 am, edited 1 time in total.
erics
 
Posts: 2
Joined: Thu Dec 01, 2016 12:25 pm

Re: e-CAM51IMX6 - 5MP MIPI iMX6 Wandboard Camera

Postby Tapani » Fri Dec 02, 2016 10:39 am

Nice!
Good to see another camera for the WB. There have been a few, but some of them have become difficult to get.
Tapani
Site Admin
 
Posts: 705
Joined: Tue Aug 27, 2013 8:32 am

Re: e-CAM51IMX6 - 5MP MIPI iMX6 Wandboard Camera

Postby erics » Tue Dec 27, 2016 12:01 pm

Getting started with e-CAM51IMX6 - 5MP MIPI Wandboard Camera

https://www.youtube.com/watch?v=ixtSAx9h5Us
erics
 
Posts: 2
Joined: Thu Dec 01, 2016 12:25 pm


Return to Hardware and peripherals

Who is online

Users browsing this forum: Google [Bot] and 13 guests

cron