Page 1 of 1

Wandboard Solo: which DDR3 ICs connected?

PostPosted: Mon Feb 22, 2016 3:15 pm
by Linux777
Hello!
I see schematic for Wandboard Solo/Dual: here is 4 DDR3 IC modules connected to 64-bit data bus.
The Wandboard Solo have only two of them. Which DDR3 data lines used for Wandboard Solo?
My assumption is from DRAM_D0 to DRAM_D31 - am I right?

Is using hardware video encoding (H264) dependent on memory bus bandwidth? May I use Wandboard Solo for H264 encoding?