EDM1-IMX6-SD Rev A1 & C1 Base board

You have a problem with your Wandboard and want to ask the community for help.

EDM1-IMX6-SD Rev A1 & C1 Base board

Postby kenny.Lee » Wed Jul 19, 2017 1:33 am

Hello

I bought wandboard (EDM1-IMX6-SD Rev A1 & D1 baseboard) and have C1 base board also.

Can I use EDM1-IMX6-SD Rev A1 and C1 base board?
(the same purpose different question) The connector pin maps on two base board (C1 & D1) are the same or not?

Thanks
Kenny
kenny.Lee
 
Posts: 1
Joined: Wed Jul 19, 2017 1:21 am

Re: EDM1-IMX6-SD Rev A1 & C1 Base board

Postby imranafaqy » Tue Aug 08, 2017 1:07 am

Hi Kenny,

Were you able to use Rev A1 and C1 base board? I have the same requirement.

Regards,
Imran
imranafaqy
 
Posts: 1
Joined: Tue Aug 08, 2017 1:05 am

Re: EDM1-IMX6-SD Rev A1 & C1 Base board

Postby Tapani » Fri Aug 11, 2017 9:08 am

Yes.
It is one of the points of the edm connector that any EDM1 module should work on any EDM1 baseboard.
For instance, me myself don't even look at the baseboard revision before I plug a CPU module on it. It will work.
Tapani
Site Admin
 
Posts: 701
Joined: Tue Aug 27, 2013 8:32 am

Re: EDM1-IMX6-SD Rev A1 & C1 Base board

Postby rahul12 » Sat Sep 23, 2017 1:56 am

Those days, most of the well-known free mahjong no download Connect floor tiles were made with various other materials and based upon price, the quality of these floor tiles can be higher or reduced.
rahul12
 
Posts: 4
Joined: Sun Sep 10, 2017 8:16 am


Return to Getting started

Who is online

Users browsing this forum: No registered users and 16 guests