OpenELEC

XBMC subforum

Re: OpenELEC

Postby Lt.Cmdr.Ivan » Thu Jun 18, 2015 4:18 pm

Unfortunately the OpenELEC-imx6.arm-6.0-devel-20150618154530-r21049-gadddc32.img file only shows the wandboard logo on hdmi and nothing more.
Last edited by Lt.Cmdr.Ivan on Thu Jun 18, 2015 4:31 pm, edited 1 time in total.
Lt.Cmdr.Ivan
 

Re: OpenELEC

Postby Lt.Cmdr.Ivan » Thu Jun 18, 2015 4:30 pm

I have retested, repacked and reuploaded one of the modded images for Wandboard

http://uploaded.net/file/xhe4airf

The MD5 hashes are as follows

OpenELEC-imx6.arm-6.00-wand.img
5755a7873c8eaa9f487ba7f92ba3063a

OpenElec-imx6-20150609125648-r20997-g0d9609f_rar5.rar
2465567ff5ad3e140f7007c2bb6a0fe6

@Tapani
The rar is packed with the newest Winrar 5.21
Could you check the MD5 hashes?
Hopefully this time it works

######################################################
Credits

The Original base image has been created by:

SyedAmerGilani

and was downloaded from the URL:

https://github.com/SyedAmerGilani/OpenELEC.tv

The file was named:

OpenELEC-imx6.arm-devel-20141228151119-r19885-gd84ab80.rar

I did not create that original image.
I just downloaded it.

-----------------------------------------------------

I modified the image and replaced the openelec system and files
with the files from:

XoDDark

downloaded from the URL:

http://www.xoddark.com/Public/openelec/build/

The file the contents were taken from was named:

OpenELEC-imx6.arm-6.0-devel-20150609125648-r20997-g0d9609f-all.tar

and combined by me.

----------------------------------------------------

I do not take responsibility for anything you do with this image.

Image only combined by me

I did not create or build any of the contained files i just combined them.
Lt.Cmdr.Ivan
 

Re: OpenELEC

Postby XoD » Thu Jun 18, 2015 5:04 pm

Lt.Cmdr.Ivan wrote:Unfortunately the OpenELEC-imx6.arm-6.0-devel-20150618154530-r21049-gadddc32.img file only shows the wandboard logo on hdmi and nothing more.

I just realize than I forgot to add a uEnv-wandboard.txt and remove the uEnv-wandboard_dl.txt and uEnv-wandboard_q.txt.

I made a new image : OpenELEC-imx6.arm-6.0-devel-20150618185638-r21049-g2018d81-wandboard.img.gz
... again, sorry for that ;)
XoD
 
Posts: 43
Joined: Thu May 29, 2014 12:52 pm

Re: OpenELEC

Postby Lt.Cmdr.Ivan » Thu Jun 18, 2015 6:15 pm

Excellent, that did it.

Works like a charm, and the best thing is, that even the power off function works correct.
Lt.Cmdr.Ivan
 

Re: OpenELEC

Postby XoD » Thu Jun 18, 2015 6:33 pm

@Lt.Cmdr.Ivan : cool, you have tested on with version of Wandboard ? I have a Wandboard Quad revC1 at home to test it.

@vpeter: Thank you to have tried to help me, but I did not understand everything you said :P
I want to keep all u-boot output file to permit to build different system image in one time.
XoD
 
Posts: 43
Joined: Thu May 29, 2014 12:52 pm

Re: OpenELEC

Postby Lt.Cmdr.Ivan » Thu Jun 18, 2015 6:54 pm

I tested the Build on a Wandboard Quad Revision BI or B1.
Lt.Cmdr.Ivan
 

Re: OpenELEC

Postby vpeter » Fri Jun 19, 2015 6:28 am

XoD wrote:Thank you to have tried to help me, but I did not understand everything you said
Haha. Let me finish my work on Udoo where I just finished supporting LVDS displays with touchscreen and analog audio output. Now I have everything working. Needs little cleanup and then we must come back together and add better support for Wandboard too.
vpeter
 
Posts: 78
Joined: Wed Dec 24, 2014 7:44 am

Re: OpenELEC

Postby XoD » Fri Jun 19, 2015 7:41 am

@vepeter: with this branch imx6_wandbard, the wandboard support seems to work.
But I need to test if Cuboxi always work, normally upstream version of u-boot should integrate cuboxi support, but verify is better ;)
XoD
 
Posts: 43
Joined: Thu May 29, 2014 12:52 pm

Re: OpenELEC

Postby jaca2300 » Thu Jul 16, 2015 4:21 pm

Hi
I also tried it on a Wandboard Quad rev. C1 and it did not work.
Looked at the code, it seems like the kernel/dtb only is for rev. B1
I did try too patch it up with some KERNEL/arch/arm/boot/dts/*.dtsi etc from Robert Nelson kernel at https://eewiki.net/display/linuxonarm/Wandboard, but without success.
In u-boot /configs/wandboard.h you can def CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and env var 'board_name' will be C1 or B1.
jaca2300
 
Posts: 6
Joined: Fri Jun 06, 2014 9:59 am

Re: OpenELEC

Postby Lt.Cmdr.Ivan » Thu Jul 30, 2015 5:09 pm

Hi,

i checked the last build version from

http://www.xoddark.com/Public/openelec/ ... vel.img.gz

and it did not boot on my wandboard quad B1.
Lt.Cmdr.Ivan
 

PreviousNext

Return to Software - XBMC

Who is online

Users browsing this forum: No registered users and 2 guests

cron