How do I switch from a Wandboard to an EDM board

This is the place for software discussions not having a dedicated subforum

How do I switch from a Wandboard to an EDM board

Postby nevmair » Fri Jan 29, 2016 4:59 pm

I know that the basic difference between the wandboards and EDM boards is SD card on the wand VS FLASH on the EDM board.

What do I have to change in u-boot to boot from the FLASH instead of the SD card?

I am using the latest u-boot and a 3.10.53 kernel from the wandboard git.


Thanks
Neville
nevmair
 
Posts: 43
Joined: Mon Feb 16, 2015 3:42 pm

Re: How do I switch from a Wandboard to an EDM board

Postby Tapani » Mon Feb 15, 2016 1:16 pm

Sorry about the delayed answer, we have been afk over Chinese New Years leave.

Which edm boards are you referring to?
edm-cf-imx6 is similar to wanboard, but with eMMC flash instead of on-module SD card.
Also some pins are different, but I'd say they are some 80-90% compatible.
Tapani
 
Posts: 712
Joined: Tue Aug 27, 2013 8:32 am

Re: How do I switch from a Wandboard to an EDM board

Postby nevmair » Tue Feb 16, 2016 3:28 pm

Not a problem with the delay. Hope you had a good new year.

It is an EDM1-CF-IMX6 (specifically EDM1-CF-iMX6U10-R1GB-Ni4G-BW-L-2C-TE)

I have noted the other differences between the 2 boards.
We are using a custom carrier board and have remapped the necessary pins.


Thanks
neville
nevmair
 
Posts: 43
Joined: Mon Feb 16, 2015 3:42 pm

Re: How do I switch from a Wandboard to an EDM board

Postby Tapani » Tue Feb 23, 2016 10:38 am

As far as I can tell, if your SD card boots from the slot on the module, it should be able to be 'dd' into eMMC on an edm-cf-imx6.
Tapani
 
Posts: 712
Joined: Tue Aug 27, 2013 8:32 am

Re: How do I switch from a Wandboard to an EDM board

Postby isaacdean » Thu Aug 01, 2019 4:27 am

I've been experimenting with using the 3.14-1.0.x-mx6 branch of Freescale/linux-fslc with good results on my rev C1 Wandboard-Quad. I forked it, ported over the patches for Wandboard support from the 3.14.28 branch in linux-wandboard, and have thrown in a few other patches to address some issues I was seeing.

happy wheels
isaacdean
 
Posts: 1
Joined: Thu Aug 01, 2019 4:22 am


Re: How do I switch from a Wandboard to an EDM board

Postby MollyEskam » Thu Jun 11, 2020 12:39 pm

Offshore Hosting with 100% DMCA ignored Hosting, Offshore Dedicated Server, Offshore VPS Hosting. Offshorededi is the Most Secure Offshore Host.
MollyEskam
 
Posts: 1
Joined: Thu Jun 11, 2020 12:36 pm

Re: How do I switch from a Wandboard to an EDM board

Postby webcare360 » Mon Jun 29, 2020 7:24 pm

DMCA IGNORE HOSTING
ANONYMOUS, SECURE & DMCA IGNORE OFFSHORE WEBHOSTING
https://webcare360.com/
webcare360
 
Posts: 1
Joined: Mon Jun 29, 2020 7:23 pm

Re: How do I switch from a Wandboard to an EDM board

Postby ABsecurity » Sun Jul 05, 2020 10:10 am

I recently noticed your website back i are generally looking through which on a daily basis.
https://absecuritysol.com/dahua/hdcvi/
ABsecurity
 
Posts: 2
Joined: Sun Jul 05, 2020 10:09 am

Re: How do I switch from a Wandboard to an EDM board

Postby Offshore25 » Sun Aug 02, 2020 8:06 am

Offshore25
 
Posts: 2
Joined: Mon Jun 15, 2020 6:20 am

Next

Return to Software - General

Who is online

Users browsing this forum: No registered users and 42 guests