parttions permission change & problem!

Discuss Android on the Wandboard, as well as app development for or on the Wandboard.

parttions permission change & problem!

Postby khiremandar » Fri Feb 27, 2015 11:26 am

Hi,
I done 2 things
1. Change permissions
2. Root the device with help of http://forums.wandboard.org/viewtopic.php?f=11&t=732
I change permission of 2 partitions
1. 57f8f4bc-abf4-655f-bf67-946fc0f9f25b
2. data
by chmod -R 777 command
got result when i cross check 'ls -al' as follows:-
Code: Select all
total 20
drwxrwxrwx+  8 root       root       4096 Feb 27 16:49 .
drwxr-xr-x   3 root       root       4096 Jan 23 17:03 ..
drwxrwxrwx. 14 root       root       4096 Jan  1  1970 57f8f4bc-abf4-655f-bf67-946fc0f9f25b
drwxrwx---   4 androiddev       2001 1024 Jan  2  1970 cache
drwxrwx--x  24 androiddev androiddev 4096 Jan  1  1970 data
drwx------   3 androiddev androiddev  512 Jan  1  1970 imx6
drwxr-xr-x   3 root       root       1024 Jan 23 17:02 rootfs
drwxr-xr-x   3 root       root       1024 Jan 23 17:03 vender
root@DTP233:/media/androiddev#


But when i put sd card in wandboard & boot then i got log as follows:-
Code: Select all
mmc0 is current device
reading boot/uEnv.txt
237 bytes read in 10 ms (22.5 KiB/s)
Loaded environment from boot/uEnv.txt
Importing environment...
reading boot/uramdisk.img
499400 bytes read in 43 ms (11.1 MiB/s)
reading boot/uImage
2924636 bytes read in 166 ms (16.8 MiB/s)
## Booting kernel from Legacy Image at 10800000 ...
   Image Name:   Linux-3.0.35
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2924572 Bytes = 2.8 MiB
   Load Address: 10008000
   Entry Point:  10008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   Android Root Filesystem
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    499336 Bytes = 487.6 KiB
   Load Address: 10800800
   Entry Point:  10800800
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.0.35 (root@DTP233) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #5 SMP PREEMPT Wed Jan 21 20:5
[    0.000000] CPU identified as i.MX6Q, silicon rev 1.2
[    0.000000] PERCPU: Embedded 7 pages/cpu @81985000 s5696 r8192 d14784 u32768
[    0.000000] Kernel command line: console=ttymxc0,115200 androidboot.console=ttymxc0 androidboot.hardware=freescale vmalloc=400M dispy
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Memory: 1615MB 240MB = 1855MB total
[    0.000000] Memory: 1871216k/1871216k available, 225936k reserved, 441344K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xfbe00000 - 0xffe00000   (  64 MB)
[    0.000000]     vmalloc : 0xd9800000 - 0xf2000000   ( 392 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xd9000000   (1424 MB)
[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000]       .init : 0x80008000 - 0x80041000   ( 228 kB)
[    0.000000]       .text : 0x80041000 - 0x80796000   (7508 kB)
[    0.000000]       .data : 0x80796000 - 0x807eea40   ( 355 kB)
[    0.000000]        .bss : 0x807eea64 - 0x80975f98   (1566 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:624
[    0.000000] MXC GPIO hardware
[    0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
[    0.000000] arm_max_freq=1GHz
[    0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
[    0.000000] bootconsole [ttymxc0] enabled
[    0.000000] Console: colour dummy device 80x30
[    0.190954] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[    0.279281] pid_max: default: 32768 minimum: 301
[    0.284197] Mount-cache hash table entries: 512
[    0.289594] CPU: Testing write buffer coherency: ok
[    0.644817] Brought up 4 CPUs
[    0.647808] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
[    0.673773] print_constraints: dummy:
[    0.677795] NET: Registered protocol family 16
[    0.687085] print_constraints: vddpu: 725 <--> 1300 mV at 1150 mV fast normal
[    0.694647] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
[    0.702419] print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
[    0.710103] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
[    0.717862] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
[    0.725535] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
[    0.736301] ram_console: got buffer at 7ff00000, size 100000
[    0.742094] ram_console: found existing buffer, size 35338, start 35338
[    0.842656] console [ram-1] enabled
[    0.868268] mx6_display : list of transmitter settings:
[    0.873626] mx6_display : lcd0 : ipu0, di0
[    0.880189] EDWARD: btwifi_pwr GPIO_5_31 is gpio159
[    0.885492] EDWARD: wl_rst_n GPIO_6_0 is gpio160
[    0.890594] EDWARD: wl_reg_on GPIO_1_26 is gpio26
[    0.957733] L310 cache controller enabled
[    0.961866] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x32070000, Cache size: 1048576 B
[    1.063406] bio: create slab <bio-0> at 0
[    1.071027] mxs-dma mxs-dma-apbh: initialized
[    1.076076] print_constraints: VDDA: 2500 mV
[    1.080759] print_constraints: VDDIO: 3300 mV
[    1.085844] vgaarb: loaded
[    1.089411] SCSI subsystem initialized
[    1.093691] libata version 3.00 loaded.
[    1.098272] spi_imx imx6q-ecspi.0: probed
[    1.102675] spi_imx imx6q-ecspi.1: probed
[    1.107607] usbcore: registered new interface driver usbfs
[    1.113466] usbcore: registered new interface driver hub
[    1.119090] usbcore: registered new device driver usb
[    1.124343] Freescale USB OTG Driver loaded, $Revision: 1.55 $
[    1.144813] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    1.164809] imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    1.172718] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    1.180262] Bluetooth: Core ver 2.16
[    1.184074] NET: Registered protocol family 31
[    1.188734] Bluetooth: HCI device and connection manager initialized
[    1.195220] Bluetooth: HCI socket layer initialized
[    1.200302] Bluetooth: L2CAP socket layer initialized
[    1.205479] Bluetooth: SCO socket layer initialized
[    1.211039] cfg80211: Calling CRDA to update world regulatory domain
[    1.218618] Switching to clocksource mxc_timer1
[    1.237331] NET: Registered protocol family 2
[    1.242051] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[    1.250421] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.261863] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    1.269833] TCP: Hash tables configured (established 262144 bind 65536)
[    1.276578] TCP reno registered
[    1.279920] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    1.286109] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    1.293178] NET: Registered protocol family 1
[    1.297976] RPC: Registered named UNIX socket transport module.
[    1.304124] RPC: Registered udp transport module.
[    1.308941] RPC: Registered tcp transport module.
[    1.313850] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.320415] PCI: CLS 0 bytes, default 32
[    1.324621] Unpacking initramfs...
[    1.360437] Freeing initrd memory: 484K
[    1.364466] _regulator_get: etb supply vcore not found, using dummy regulator
[    1.372326] _regulator_get: etm.0 supply vcore not found, using dummy regulator
[    1.379851] _regulator_get: etm.1 supply vcore not found, using dummy regulator
[    1.387445] _regulator_get: etm.2 supply vcore not found, using dummy regulator
[    1.395056] _regulator_get: etm.3 supply vcore not found, using dummy regulator
[    1.402863] Static Power Management for Freescale i.MX6
[    1.408307] wait mode is disabled for i.MX6
[    1.412792] cpaddr = d9880000 suspend_iram_base=d9914000
[    1.418404] PM driver module loaded
[    1.422058] iMX6 PCIe PCIe RC mode imx_pcie_pltfm_probe entering.
[    1.533407] PCIE: imx_pcie_pltfm_probe start link up.
[    2.141856] link up failed, DB_R0:0x00e26900, DB_R1:0x08200000!
[    2.147919] IMX PCIe port: link down with power supply 1!
[    2.153970] IMX usb wakeup probe
[    2.157396] the wakeup pdata is 0xd63f60c0
[    2.162077] add wake up source irq 75
[    2.172547] IMX usb wakeup probe
[    2.175971] the wakeup pdata is 0xd6401ac0
[    2.180671] rfkill: BT RF going to : on
[    2.184723] edm_cf_imx6_bt_on
[    2.187808] mxc_bt_rfkill driver success loaded
[    2.192603] cpu regulator mode:ldo_enable
[    2.197027] i.MXC CPU frequency driver
[    2.223872] highmem bounce pool size: 64 pages
[    2.228718] ashmem: initialized
[    2.243920] NTFS driver 2.1.30 [Flags: R/O].
[    2.248863] fuse init (API version 7.16)
[    2.253526] msgmni has been set to 2793
[    2.258367] NET: Registered protocol family 38
[    2.263076] cryptodev: driver loaded.
[    2.266930] io scheduler noop registered
[    2.270943] io scheduler deadline registered
[    2.275390] io scheduler cfq registered (default)
[    2.282612] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver lcd
[    2.306067] imx-sdma imx-sdma: loaded firmware 1.1
[    2.315751] imx-sdma imx-sdma: initialized
[    2.320293] Serial: IMX driver
[    2.323540] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
[    2.330169] console [ttymxc0] enabled, bootconsole disabled
[    2.330169] console [ttymxc0] enabled, bootconsole disabled
[    2.341669] imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
[    2.348544] imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
[    2.356096] ion: failed to create debug files.
[    2.363984] loop: module loaded
[    2.367257] at24 2-0050: 1024 byte 24c08 EEPROM, writable, 16 bytes/write
[    2.433397] fairy_board_setup:Test on Baseboard Identification.
[    2.439556] _regulator_get: 2-0018 supply Vdd not found, using dummy regulator
[    2.446957] _regulator_get: 2-0018 supply Vdd_IO not found, using dummy regulator
[    2.474740] lis3lv02d: unknown sensor type 0xFB
[    2.479375] lis3lv02d_i2c: probe of 2-0018 failed with error -22
[    2.507487] Wait for CR ACK error!
[    2.553421] No sata disk.
[    2.556344] vcan: Virtual CAN interface driver
[    2.560873] CAN device driver interface
[    2.564870] flexcan netdevice driver
[    2.568686] FEC Ethernet Driver
[    2.574370] fec_enet_mii_bus: probed
[    2.579068] PPP generic driver version 2.4.2
[    2.583720] PPP Deflate Compression module registered
[    2.588926] PPP BSD Compression module registered
[    2.594126] PPP MPPE Compression module registered
[    2.599004] NET: Registered protocol family 24
[    2.603630] PPTP driver version 0.8.5
[    2.607835] usbcore: registered new interface driver asix
[    2.613534] usbcore: registered new interface driver cdc_ether
[    2.619580] usbcore: registered new interface driver smsc75xx
[    2.625617] usbcore: registered new interface driver smsc95xx
[    2.631562] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    2.639182] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.645974] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[    2.652837] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[    2.683414] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
[    2.703402] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[    2.709678] hub 1-0:1.0: USB hub found
[    2.713535] hub 1-0:1.0: 1 port detected
[    2.717756] add wake up source irq 72
[    2.721610] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[    2.728342] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[    2.763409] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
[    2.783397] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[    2.789609] hub 2-0:1.0: USB hub found
[    2.793465] hub 2-0:1.0: 1 port detected
[    2.797855] Initializing USB Mass Storage driver...
[    2.803045] usbcore: registered new interface driver usb-storage
[    2.809146] USB Mass Storage support registered.
[    2.814264] usbcore: registered new interface driver usbserial
[    2.820185] usbserial: USB Serial Driver core
[    2.824812] USB Serial support registered for cp210x
[    2.829995] usbcore: registered new interface driver cp210x
[    2.835728] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[    2.842707] USB Serial support registered for FTDI USB Serial Device
[    2.849433] usbcore: registered new interface driver ftdi_sio
[    2.855273] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[    2.861378] USB Serial support registered for GSM modem (1-port)
[    2.867677] usbcore: registered new interface driver option
[    2.873413] option: v0.7.2:USB Driver for GSM modems
[    2.878568] USB Serial support registered for pl2303
[    2.883832] usbcore: registered new interface driver pl2303
[    2.889487] pl2303: Prolific PL2303 USB to serial adaptor driver
[    2.895802] USB Serial support registered for Qualcomm USB modem
[    2.902031] usbcore: registered new interface driver qcserial
[    2.907939] ARC USBOTG Device Controller driver (1 August 2005)
[    2.916339] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.923368] android_usb gadget: Number of LUNs=1
[    2.928084]  lun0: LUN: removable file: (no medium)
[    2.933559] Gadget Android: controller 'fsl-usb2-udc' not recognized
[    2.940004] android_usb gadget: android_usb ready
[    2.944871] Suspend udc for OTG auto detect
[    2.949142] USB Host suspend begins
[    2.952712] will suspend roothub and its children
[    2.957589] ehci_fsl_bus_suspend begins, DR
[    2.961870] ehci_fsl_bus_suspend ends, DR
[    2.965980] host suspend ends
[    2.969030] USB Gadget resume begins
[    2.972686] fsl_udc_resume, Wait for wakeup thread finishes
[    2.981631] dr_controller_run: udc out low power mode
[    2.986794] USB Gadget resume ends
[    2.990278] fsl-usb2-udc: bind to driver android_usb
[    2.995785] mousedev: PS/2 mouse device common for all mice
[    3.001939] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.009193] _regulator_get: spi0.0 supply vcc not found, using dummy regulator
[    3.016756] ads7846 spi0.0: touchscreen, irq 357
[    3.022083] input: ADS7846 Touchscreen as /devices/platform/imx6q-ecspi.0/spi_master/spi0/spi0.0/input/input1
[    3.032793] prism: probe of 1-0010 failed with error -1
[    3.038410] isl29023 2-0044: standard operating mode
[    3.043648] isl29023_probe: failed!!
[    3.047314] isl29023: probe of 2-0044 failed with error -5
[    3.052985] i2c-core: driver [isl29023] using legacy suspend method
[    3.059418] i2c-core: driver [isl29023] using legacy resume method
[    3.066234] rtc-ds1307: probe of 2-0068 failed with error -5
[    3.072230] i2c /dev entries driver
[    3.076399] Linux video capture interface: v2.00
[    3.081513] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
[    3.089184] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
[    3.096992] usbcore: registered new interface driver uvcvideo
[    3.102890] USB Video Class driver (v1.1.0)
[    3.107193] mag3110 2-000e: check mag3110 chip ID
[    3.112092] mag3110 2-000e: read chip ID 0xfffffffb is not equal to 0xc4!
[    3.119049] mag3110: probe of 2-000e failed with error -22
[    3.124726] i2c-core: driver [mag3110] using legacy suspend method
[    3.131056] i2c-core: driver [mag3110] using legacy resume method
[    3.137576] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
[    3.145790] Bluetooth: Virtual HCI driver ver 1.3
[    3.150802] Bluetooth: HCI UART driver ver 2.2
[    3.155341] Bluetooth: HCI H4 protocol initialized
[    3.160215] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    3.166088] usbcore: registered new interface driver btusb
[    3.171881] cpuidle: using governor ladder
[    3.176172] cpuidle: using governor menu
[    3.180302] sdhci: Secure Digital Host Controller Interface driver
[    3.186641] sdhci: Copyright(c) Pierre Ossman
[    3.191164] sdhci sdhci-esdhc-imx.2: no write-protect pin available!
[    3.197723] _regulator_get: sdhci-esdhc-imx.2 supply vmmc not found, using dummy regulator
[    3.206341] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
[    3.214616] _regulator_get: sdhci-esdhc-imx.1 supply vmmc not found, using dummy regulator
[    3.229351] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
[    3.236561] sdhci sdhci-esdhc-imx.0: no write-protect pin available!
[    3.252238] _regulator_get: sdhci-esdhc-imx.0 supply vmmc not found, using dummy regulator
[    3.276076] mmc2: SDHCI controller on platform [sdhci-esdhc-imx.0] using DMA
[    3.285469] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[    3.296811] VPU initialized
[    3.300617] mxc_asrc registered
[    3.308084] Galcore version 4.6.9.9754
[    3.345404] revserved_memory_account:viv_gpu registerd
[    3.351213] Thermal calibration data is 0x59450169
[    3.356171] Thermal sensor with ratio = 185
[    3.373452] Anatop Thermal registered as thermal_zone0
[    3.378840] anatop_thermal_probe: default cooling device is cpufreq!
[    3.386848] usbcore: registered new interface driver usbhid
[    3.392577] usbhid: USB HID core driver
[    3.398674] logger: created 256K log 'log_main'
[    3.403454] logger: created 256K log 'log_events'
[    3.408467] logger: created 256K log 'log_radio'
[    3.413320] logger: created 256K log 'log_system'
[    3.418436] zram: num_devices not specified. Using default: 1
[    3.424277] zram: Creating 1 devices ...
[    3.429172] usbcore: registered new interface driver snd-usb-audio
[    3.436084] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
[    3.441551] mxc_spdif mxc_spdif.0: MXC SPDIF Audio
[    3.447030] mmc0: host does not support reading read-only switch. assuming write-enable.
[    3.447537] imx-hdmi-soc-dai imx-hdmi-soc-dai.0: Failed: Load HDMI-video first.
[    3.448506] _regulator_get: 1-000a supply VDDD not found, using dummy regulator
[    3.474333] sgtl5000 1-000a: sgtl5000 revision 17
[    3.490420] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal
[    3.516964] mmc0: new high speed SDHC card at address aaaa
[    3.523249] mmcblk0: mmc0:aaaa SS16G 14.8 GiB
[    3.550730] asoc: sgtl5000 <-> imx-ssi.1 mapping ok
[    3.560398]  mmcblk0: p1 p2 p3 < p5 p6 p7 p8 > p4
[    3.562667] asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok
[    3.563337] Initialize HDMI-audio failed. Load HDMI-video first!
[    3.563345] ALSA device list:
[    3.563351]   #0: sgtl5000-audio
[    3.563357]   #1: imx-spdif
[    3.563484] GACT probability NOT on
[    3.563496] Mirror/redirect action on
[    3.563503] u32 classifier
[    3.563508]     Actions configured
[    3.563516] Netfilter messages via NETLINK v0.30.
[    3.563565] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.564447] ctnetlink v0.93: registering with nfnetlink.
[    3.564486] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.564494] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.565054] xt_time: kernel timezone is -0000
[    3.565848] IPv4 over IPv4 tunneling driver
[    3.566945] GRE over IPv4 demultiplexor driver
[    3.567699] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.567865] arp_tables: (C) 2002 David S. Miller
[    3.567918] TCP cubic registered
[    3.568966] NET: Registered protocol family 10
[    3.573457] Mobile IPv6
[    3.573494] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.573751] IPv6 over IPv4 tunneling driver
[    3.578552] NET: Registered protocol family 17
[    3.578590] NET: Registered protocol family 15
[    3.578598] can: controller area network core (rev 20090105 abi 8)
[    3.578697] NET: Registered protocol family 29
[    3.578708] can: raw protocol (rev 20090105)
[    3.578715] can: broadcast manager protocol (rev 20090105 t)
[    3.578797] Bluetooth: RFCOMM TTY layer initialized
[    3.578808] Bluetooth: RFCOMM socket layer initialized
[    3.578816] Bluetooth: RFCOMM ver 1.11
[    3.578824] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.578833] Bluetooth: BNEP filters: protocol multicast
[    3.578842] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.579033] L2TP core driver, V2.0
[    3.579054] PPPoL2TP kernel driver, V2.0
[    3.579060] L2TP IP encapsulation support (L2TPv3)
[    3.579296] L2TP netlink interface
[    3.579321] L2TP ethernet pseudowire support (L2TPv3)
[    3.579328] lib80211: common routines for IEEE802.11 drivers
[    3.579337] lib80211_crypt: registered algorithm 'NULL'
[    3.579347] Registering the dns_resolver key type
[    3.770690] VFP support v0.3:
[    3.770908] USB Gadget resume begins
[    3.770917] fsl_udc_resume, Wait for wakeup thread finishes
[    3.783290] implementor 41 architecture 3 part 30 variant 9 rev 4
[    3.789550] ThumbEE CPU extension supported.
[    3.794355] Bus freq driver module loaded
[    3.798521] Bus freq driver Enabled
[    3.802152] mxc_dvfs_core_probe
[    3.805556] DVFS driver module loaded
[    3.809922] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    3.816667] Freeing init memory: 228K
[    5.410368] healthd: No charger supplies found
[    5.415051] healthd: BatteryStatusPath not found
[    5.419769] healthd: BatteryHealthPath not found
[    5.424491] healthd: BatteryPresentPath not found
[    5.429352] healthd: BatteryCapacityPath not found
[    5.434240] healthd: BatteryVoltagePath not found
[    5.439100] healthd: BatteryTemperaturePath not found
[    5.444246] healthd: BatteryTechnologyPath not found
[    5.449399] binder: 1421:1421 transaction failed 29189, size 0-0
[    5.526825] init: cannot execve('/system/etc/install-recovery.sh'): Permission denied
[    5.530247] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
[    5.530268] init: property 'ro.serialno' doesn't exist while expanding '$ro.serialno'
[    5.530282] init: cannot expand '$ro.serialno' while writing to '/sys/class/android_usb/android0/iSerial'
[    5.530300] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
[    5.530316] init: property 'ro.product.manufacturer' doesn't exist while expanding '$ro.product.manufacturer'
[    5.530330] init: cannot expand '$ro.product.manufacturer' while writing to '/sys/class/android_usb/android0/iManufacturer'
[    5.530347] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
[    5.530361] init: property 'ro.product.model' doesn't exist while expanding '$ro.product.model'
[    5.530374] init: cannot expand '$ro.product.model' while writing to '/sys/class/android_usb/android0/iProduct'
[    5.632101] init: cannot find '/system/bin/ingsvcd', disabling 'ing'
[    5.638917] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[    5.647326] init: powerctl: cannot expand '${sys.powerctl}'
[    5.653034] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[    5.664170] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[    5.674909] android_usb: already disabled
[    5.679195] mtp_bind_config
[    5.682159] adb_bind_config
[    5.687245] adb_open
root@android:/ # [    8.151570] binder: release 1427:1526 transaction 73 in, still active
[    8.159058] binder: send failed reply for transaction 73 to 1702:1720
[    8.169750] request_suspend_state: wakeup (3->0) at 7976368003 (1970-01-01 00:00:07.967658004 UTC)
[   11.641490] binder: release 1783:1793 transaction 124 in, still active
[   11.651270] binder: send failed reply for transaction 124 to 1819:1826
[   11.653335] request_suspend_state: wakeup (0->0) at 11459954008 (1970-01-01 00:00:11.451244676 UTC)
[   11.664333] init: untracked pid 1851 exited
[   16.122568] binder: release 1853:1861 transaction 175 in, still active
[   16.129282] binder: send failed reply for transaction 175 to 1888:1896
[   16.144058] binder: release proc 1888, transaction 177, not freed
[   16.147396] request_suspend_state: wakeup (0->0) at 15954015670 (1970-01-01 00:00:15.945306338 UTC)
[   16.148760] init: untracked pid 1915 exited
[   21.634465] request_suspend_state: wakeup (0->0) at 21441076444 (1970-01-01 00:00:21.432363111 UTC)
[   21.636266] binder: release 1917:1924 transaction 228 in, still active
[   21.636277] binder: send failed reply for transaction 228 to 1954:1961
[   21.658043] binder: release proc 1954, transaction 230, not freed
[   21.664468] init: untracked pid 1988 exited
[   26.123198] request_suspend_state: wakeup (0->0) at 25929814005 (1970-01-01 00:00:25.921104340 UTC)
[   26.132632] binder: release 1990:2000 transaction 281 in, still active
[   26.139570] binder: send failed reply for transaction 281 to 2023:2031
[   26.140416] init: untracked pid 2054 exited
[   31.611155] binder: release 2056:2065 transaction 332 in, still active
[   31.618277] binder: send failed reply for transaction 332 to 2089:2097
[   31.643722] request_suspend_state: wakeup (0->0) at 31450316848 (1970-01-01 00:00:31.441607183 UTC)
[   36.111284] binder: release 2135:2144 transaction 383 in, still active
[   36.118049] binder: send failed reply for transaction 383 to 2169:2176
[   36.121101] request_suspend_state: wakeup (0->0) at 35927719672 (1970-01-01 00:00:35.919009340 UTC)
[   41.618690] binder: release 2201:2211 transaction 434 in, still active
[   41.624735] request_suspend_state: wakeup (0->0) at 41431353007 (1970-01-01 00:00:41.422643675 UTC)
[   41.634447] init: untracked pid 2266 exited
[   41.643506] binder: send failed reply for transaction 434 to 2237:2244

root@android:/ #
root@android:/ # [   46.101809] binder: release 2270:2280 transaction 485 in, still active
[   46.108473] binder: send failed reply for transaction 485 to 2304:2320
[   46.111672] request_suspend_state: wakeup (0->0) at 45918291675 (1970-01-01 00:00:45.909581676 UTC)
[   46.112859] init: untracked pid 2337 exited
[   46.129768] binder: release proc 2304, transaction 487, not freed
[   51.576435] binder: release 2340:2350 transaction 538 in, still active
[   51.583116] binder: send failed reply for transaction 538 to 2373:2381
[   51.593343] request_suspend_state: wakeup (0->0) at 51399961008 (1970-01-01 00:00:51.391251342 UTC)
[   51.606325] init: untracked pid 2401 exited
[   56.105762] binder: release 2403:2413 transaction 589 in, still active
[   56.112489] binder: send failed reply for transaction 589 to 2444:2452
[   56.120467] binder: release proc 2444, transaction 591, not freed
[   56.208847] request_suspend_state: wakeup (0->0) at 56015464342 (1970-01-01 00:00:56.006754010 UTC)
[   56.219861] init: untracked pid 2498 exited
[   60.698784] binder: release 2500:2509 transaction 642 in, still active
[   60.705469] binder: send failed reply for transaction 642 to 2538:2545
[   60.709789] request_suspend_state: wakeup (0->0) at 60516407676 (1970-01-01 00:01:00.507698344 UTC)
[   60.714319] init: untracked pid 2576 exited
[   66.201455] binder: release 2578:2587 transaction 693 in, still active
[   66.208307] binder: send failed reply for transaction 693 to 2615:2622
[   66.404063] request_suspend_state: wakeup (0->0) at 66210669678 (1970-01-01 00:01:06.201959679 UTC)
[   66.414307] init: untracked pid 2682 exited
[   70.900913] binder: release 2684:2693 transaction 744 in, still active
[   70.907713] binder: send failed reply for transaction 744 to 2722:2730
[   70.917918] binder: 2722:2730 transaction failed 29189, size 76-0
[   71.053964] request_suspend_state: wakeup (0->0) at 70860580344 (1970-01-01 00:01:10.851870679 UTC)
[   71.065065] init: untracked pid 2791 exited
[   76.591961] binder: release 2793:2803 transaction 795 in, still active
[   76.598683] binder: send failed reply for transaction 795 to 2824:2831
[   76.611916] binder: release proc 2824, transaction 797, not freed
[   76.793830] request_suspend_state: wakeup (0->0) at 76600443679 (1970-01-01 00:01:16.591734347 UTC)
[   76.804878] init: untracked pid 2916 exited
[   81.264184] binder: release 2918:2927 transaction 848 in, still active
[   81.271375] binder: send failed reply for transaction 848 to 2954:2960
[   81.279534] binder: release proc 2954, transaction 850, not freed
[   81.413808] request_suspend_state: wakeup (0->0) at 81220424385 (1970-01-01 00:01:21.211714719 UTC)
[   81.425926] init: untracked pid 3014 exited
[   85.879278] binder: release 3016:3026 transaction 901 in, still active
[   85.886002] binder: send failed reply for transaction 901 to 3049:3057
[   86.073933] request_suspend_state: wakeup (0->0) at 85880551680 (1970-01-01 00:01:25.871842348 UTC)
[   86.086009] init: untracked pid 3124 exited
[   91.607211] binder: release 3126:3136 transaction 952 in, still active
[   91.613944] binder: send failed reply for transaction 952 to 3163:3169
[   91.743871] request_suspend_state: wakeup (0->0) at 91550454282 (1970-01-01 00:01:31.541744616 UTC)
[   91.755924] init: untracked pid 3233 exited

i cant see anything on display & continuesly got same log... doesnt understand what happens.
Help needed.
khiremandar
 
Posts: 86
Joined: Wed Sep 03, 2014 11:38 am

Return to Software - Android

Who is online

Users browsing this forum: No registered users and 4 guests