Android source build...What next?

Discuss Android on the Wandboard, as well as app development for or on the Wandboard.

Re: Android source build...What next?

Postby omid » Tue Oct 07, 2014 8:05 pm

make sure you made /media/imx6/boot then do the rest . mkdir /media/imx6 and then one more time mkdir /media/imx6/boot
omid
 
Posts: 19
Joined: Fri Sep 12, 2014 5:13 pm

Re: Android source build...What next?

Postby omid » Tue Oct 07, 2014 8:08 pm

Don't forget to try this command instead of last command for copy system files into SD card

sudo dd if=wand-4.3/out/target/product/wandboard/system.img of=/dev/sdX5 && sudo sync
omid
 
Posts: 19
Joined: Fri Sep 12, 2014 5:13 pm

Re: Android source build...What next?

Postby khiremandar » Wed Oct 08, 2014 10:53 am

Thanks omid,
i follows step:-
Code: Select all
sudo dd if=/dev/zero of=/dev/sdb bs=1M count=1
sudo ./wand_fsl_sdcard-part.sh /dev/sdb
dd if=wand-4.3/bootable/bootloader/uboot-imx/SPL of=/dev/sdb bs=1K seek=1
[i]//here i remove SD card reader from computer & reattach it.
//imx6 & system automatically mount without mount command. I check in media it already mounted.[/i]
mkdir -p /media/androiddev/imx6/boot
cp wand-4.3/kernel_imx/arch/arm/boot/uImage /media/androiddev/imx6/boot/
cp wand-4.3/bootable/bootloader/uboot-imx/u-boot.img /media/androiddev/imx6/boot/
cp wand-4.3/bootable/bootloader/uboot-imx/out.bmp.gz /media/androiddev/imx6/boot/
cp wand-4.3/bootable/bootloader/uboot-imx/uEnv.txt /media/androiddev/imx6/boot/
mkimage -A arm -O linux -T ramdisk -C none -a 0x10800800 -n "Android Root Filesystem" -d wand-4.3/out/target/product/wandboard/ramdisk.img /media/androiddev/imx6/boot/uramdisk.img
sudo dd if=wand-4.3/out/target/product/wandboard/system.img of=/dev/sdb5 && sudo sync
sudo umount /dev/sdb*

Then in minicom i can see following log:-
Code: Select all
U-Boot SPL 2013.10 (Oct 01 2014 - 15:10:10)
Boot Device: SD0
reading boot/u-boot.img
reading boot/u-boot.img


U-Boot 2013.10 (Oct 01 2014 - 15:10:10)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment

splash_screen_prepare
reading boot/out.bmp.gz
splash:loading boot/out.bmp.gz from MMC FAT...
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
WANDBOARD=> printenv
baudrate=115200
bootargs_base=console=ttymxc0,115200
bootcmd=mmc dev ${mmcdev};if mmc rescan; then if run loadbootenv; then echo Loaded environment from ${bootenv};run importbootenv;fi;if ;
bootdelay=3
bootenv=boot/uEnv.txt
bootsys=bootm ${loadaddr}
ethact=FEC
ethaddr=00:1f:7b:b4:0f:fc
ethprime=FEC
importbootenv=echo Importing environment...; env import -t $loadaddr $filesize
initrdaddr=0x13000000
loadaddr=0x10800000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}
loadramdisk=fatload mmc ${mmcdev} ${initrdaddr} boot/uramdisk.img
loaduimage=fatload mmc ${mmcdev} ${loadaddr} boot/uImage
loaduimage_raw=mmc read ${loadaddr} 0x800 0x4000
mmcdev=0
rootdevice=root=/dev/mmcblk0p2 rootwait ro rootfstype=ext4
setbase=setenv bootargs ${bootargs_base} ${rootdevice}
setbootargs=run setbase; run setvideo; run setopts; run setplatform
setopts=setenv bootargs ${bootargs} ${optargs}
setplatform=if test -n $expansion; then setenv bootargs $bootargs expansion=$expansion;fi;if test -n $baseboard; then setenv bootargs $i
setvideo=setenv bootargs ${bootargs} ${video_mode}
splashimage=0x10800000
splashimage_file_name=boot/out.bmp.gz
splashimage_mmc_blkcnt=0x3F0
splashimage_mmc_init_block=0x410
splashpos=m,m

Environment size: 1536/8188 bytes
WANDBOARD=> boot
mmc0 is current device
reading boot/uEnv.txt
212 bytes read in 12 ms (16.6 KiB/s)
Loaded environment from boot/uEnv.txt
Importing environment...
reading boot/uramdisk.img
237804 bytes read in 28 ms (8.1 MiB/s)
reading boot/uImage
2921028 bytes read in 165 ms (16.9 MiB/s)
## Booting kernel from Legacy Image at 10800000 ...
   Image Name:   Linux-3.0.35
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2920964 Bytes = 2.8 MiB
   Load Address: 10008000
   Entry Point:  10008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 13000000 ...
   Image Name:   Android Root Filesystem
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    237740 Bytes = 232.2 KiB
   Load Address: 10800800
   Entry Point:  10800800
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.0.35 (root@DTP233) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 1 15:34
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Freescale i.MX 6Quad/DualLite/Solo Wandboard
[    0.000000] EDWARD :  ram console init at phys 0x7ff00000
[    0.000000] EDWARD : GPU_Reserved Memory equals to 184549376
[    0.000000] EDWARD :  gpumem init at phys 0x74f00000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] CPU identified as i.MX6Q, silicon rev 1.2
[    0.000000] PERCPU: Embedded 7 pages/cpu @81983000 s5696 r8192 d14784 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 470784
[    0.000000] Kernel command line: console=ttymxc0,115200 androidboot.console=ttymxc0 androidboot.hardware=wandboard vmalloc=400M dispd
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Memory: 1615MB 240MB = 1855MB total
[    0.000000] Memory: 1871476k/1871476k available, 225676k reserved, 441344K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xfbe00000 - 0xffe00000   (  64 MB)
[    0.000000]     vmalloc : 0xd9800000 - 0xf2000000   ( 392 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xd9000000   (1424 MB)
[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000]       .init : 0x80008000 - 0x80041000   ( 228 kB)
[    0.000000]       .text : 0x80041000 - 0x80793000   (7496 kB)
[    0.000000]       .data : 0x80794000 - 0x807ec900   ( 355 kB)
[    0.000000]        .bss : 0x807ec924 - 0x80973e48   (1566 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:624
[    0.000000] MXC GPIO hardware
[    0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
[    0.000000] arm_max_freq=1GHz
[    0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
[    0.000000] bootconsole [ttymxc0] enabled
[    0.000000] Console: colour dummy device 80x30
[    0.238894] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[    0.327227] pid_max: default: 32768 minimum: 301
[    0.332134] Mount-cache hash table entries: 512
[    0.337498] CPU: Testing write buffer coherency: ok
[    0.443259] CPU1: Booted secondary processor
[    0.523253] CPU2: Booted secondary processor
[    0.603266] CPU3: Booted secondary processor
[    0.642722] Brought up 4 CPUs
[    0.658553] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
[    0.684075] print_constraints: dummy:
[    0.688075] NET: Registered protocol family 16
[    0.697252] print_constraints: vddpu: 725 <--> 1300 mV at 1150 mV fast normal
[    0.704842] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
[    0.712559] print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
[    0.720233] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
[    0.727981] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
[    0.735654] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
[    0.746255] ram_console: got buffer at 7ff00000, size 100000
[    0.752134] ram_console: uncorrectable error in header
[    0.757321] ram_console: no valid data in buffer (sig = 0xffffffff)
[    0.772017] console [ram-1] enabled
[    0.796085] mx6_display : list of transmitter settings:
[    0.801443] mx6_display : hdmi : ipu0, di0
[    0.807958] EDWARD: btwifi_pwr GPIO_5_31 is gpio159
[    0.813273] EDWARD: wl_rst_n GPIO_6_0 is gpio160
[    0.818291] EDWARD: wl_reg_on GPIO_1_26 is gpio26
[    0.885557] L310 cache controller enabled
[    0.889697] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x32070000, Cache size: 1048576 B
[    0.938921] bio: create slab <bio-0> at 0
[    0.946423] mxs-dma mxs-dma-apbh: initialized
[    0.951367] print_constraints: VDDA: 2500 mV
[    0.956081] print_constraints: VDDIO: 3300 mV
[    0.961060] vgaarb: loaded
[    0.964706] SCSI subsystem initialized
[    0.968993] libata version 3.00 loaded.
[    0.973301] spi_imx imx6q-ecspi.0: probed
[    0.977783] spi_imx imx6q-ecspi.1: probed
[    0.982671] usbcore: registered new interface driver usbfs
[    0.988521] usbcore: registered new interface driver hub
[    0.994138] usbcore: registered new device driver usb
[    0.999309] Freescale USB OTG Driver loaded, $Revision: 1.55 $
[    1.022714] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    1.042712] imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    1.050618] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    1.058129] Bluetooth: Core ver 2.16
[    1.061935] NET: Registered protocol family 31
[    1.066592] Bluetooth: HCI device and connection manager initialized
[    1.073079] Bluetooth: HCI socket layer initialized
[    1.078157] Bluetooth: L2CAP socket layer initialized
[    1.083333] Bluetooth: SCO socket layer initialized
[    1.088793] cfg80211: Calling CRDA to update world regulatory domain
[    1.096402] Switching to clocksource mxc_timer1
[    1.114598] NET: Registered protocol family 2
[    1.119368] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[    1.127590] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.139117] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    1.147089] TCP: Hash tables configured (established 262144 bind 65536)
[    1.153838] TCP reno registered
[    1.157096] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    1.163366] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    1.170434] NET: Registered protocol family 1
[    1.175220] RPC: Registered named UNIX socket transport module.
[    1.181278] RPC: Registered udp transport module.
[    1.186186] RPC: Registered tcp transport module.
[    1.191001] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.197657] PCI: CLS 0 bytes, default 32
[    1.201856] Unpacking initramfs...
[    1.221399] Freeing initrd memory: 232K
[    1.225412] _regulator_get: etb supply vcore not found, using dummy regulator
[    1.233172] _regulator_get: etm.0 supply vcore not found, using dummy regulator
[    1.240758] _regulator_get: etm.1 supply vcore not found, using dummy regulator
[    1.248359] _regulator_get: etm.2 supply vcore not found, using dummy regulator
[    1.255884] _regulator_get: etm.3 supply vcore not found, using dummy regulator
[    1.263771] Static Power Management for Freescale i.MX6
[    1.269203] wait mode is disabled for i.MX6
[    1.273694] cpaddr = d9880000 suspend_iram_base=d9914000
[    1.279211] PM driver module loaded
[    1.282968] iMX6 PCIe PCIe RC mode imx_pcie_pltfm_probe entering.
[    1.391114] PCIE: imx_pcie_pltfm_probe start link up.
[    1.999611] link up failed, DB_R0:0x00bed100, DB_R1:0x08200000!
[    2.005678] IMX PCIe port: link down with power supply 1!
[    2.011735] IMX usb wakeup probe
[    2.015169] the wakeup pdata is 0xd611fc40
[    2.019767] add wake up source irq 75
[    2.030272] IMX usb wakeup probe
[    2.033710] the wakeup pdata is 0xd6228480
[    2.038414] rfkill: BT RF going to : on
[    2.042464] edm_cf_imx6_bt_on
[    2.045552] mxc_bt_rfkill driver success loaded
[    2.050341] cpu regulator mode:ldo_enable
[    2.054767] i.MXC CPU frequency driver
[    2.080780] highmem bounce pool size: 64 pages
[    2.085561] ashmem: initialized
[    2.100653] NTFS driver 2.1.30 [Flags: R/O].
[    2.105649] fuse init (API version 7.16)
[    2.110206] msgmni has been set to 2793
[    2.115095] NET: Registered protocol family 38
[    2.119808] cryptodev: driver loaded.
[    2.123595] io scheduler noop registered
[    2.127679] io scheduler deadline registered
[    2.132122] io scheduler cfq registered (default)
[    2.139225] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
[    2.145812] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[    2.181156] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[    2.193281] imx-sdma imx-sdma: loaded firmware 1.1
[    2.202607] imx-sdma imx-sdma: initialized
[    2.207112] Serial: IMX driver
[    2.210325] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
[    2.216980] console [ttymxc0] enabled, bootconsole disabled
[    2.216980] console [ttymxc0] enabled, bootconsole disabled
[    2.228513] imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
[    2.235276] imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
[    2.242735] ion: failed to create debug files.
[    2.250416] loop: module loaded
[    2.275653] Wait for CR ACK error!
[    2.321659] No sata disk.
[    2.324587] vcan: Virtual CAN interface driver
[    2.329118] CAN device driver interface
[    2.333115] flexcan netdevice driver
[    2.336927] FEC Ethernet Driver
[    2.342540] fec_enet_mii_bus: probed
[    2.347150] PPP generic driver version 2.4.2
[    2.351842] PPP Deflate Compression module registered
[    2.356977] PPP BSD Compression module registered
[    2.362225] PPP MPPE Compression module registered
[    2.367100] NET: Registered protocol family 24
[    2.371725] PPTP driver version 0.8.5
[    2.375957] usbcore: registered new interface driver asix
[    2.381575] usbcore: registered new interface driver cdc_ether
[    2.387686] usbcore: registered new interface driver smsc75xx
[    2.393665] usbcore: registered new interface driver smsc95xx
[    2.399674] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    2.407226] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.414017] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[    2.420869] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[    2.451107] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
[    2.471100] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[    2.477288] hub 1-0:1.0: USB hub found
[    2.481211] hub 1-0:1.0: 1 port detected
[    2.485423] add wake up source irq 72
[    2.489208] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[    2.496006] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[    2.531110] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
[    2.551098] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[    2.557243] hub 2-0:1.0: USB hub found
[    2.561166] hub 2-0:1.0: 1 port detected
[    2.565535] Initializing USB Mass Storage driver...
[    2.570728] usbcore: registered new interface driver usb-storage
[    2.576827] USB Mass Storage support registered.
[    2.581943] usbcore: registered new interface driver usbserial
[    2.587864] usbserial: USB Serial Driver core
[    2.592419] USB Serial support registered for cp210x
[    2.597664] usbcore: registered new interface driver cp210x
[    2.603330] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[    2.610380] USB Serial support registered for FTDI USB Serial Device
[    2.617095] usbcore: registered new interface driver ftdi_sio
[    2.622935] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[    2.629024] USB Serial support registered for GSM modem (1-port)
[    2.635324] usbcore: registered new interface driver option
[    2.641050] option: v0.7.2:USB Driver for GSM modems
[    2.646212] USB Serial support registered for pl2303
[    2.651400] usbcore: registered new interface driver pl2303
[    2.657121] pl2303: Prolific PL2303 USB to serial adaptor driver
[    2.663348] USB Serial support registered for Qualcomm USB modem
[    2.669643] usbcore: registered new interface driver qcserial
[    2.675552] ARC USBOTG Device Controller driver (1 August 2005)
[    2.683981] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.691011] android_usb gadget: Number of LUNs=1
[    2.695719]  lun0: LUN: removable file: (no medium)
[    2.701097] Gadget Android: controller 'fsl-usb2-udc' not recognized
[    2.707606] android_usb gadget: android_usb ready
[    2.712399] Suspend udc for OTG auto detect
[    2.716737] USB Host suspend begins
[    2.720306] will suspend roothub and its children
[    2.725187] ehci_fsl_bus_suspend begins, DR
[    2.729466] ehci_fsl_bus_suspend ends, DR
[    2.733571] host suspend ends
[    2.736687] USB Gadget resume begins
[    2.740341] fsl_udc_resume, Wait for wakeup thread finishes
[    2.749214] dr_controller_run: udc out low power mode
[    2.754440] USB Gadget resume ends
[    2.757920] fsl-usb2-udc: bind to driver android_usb
[    2.763456] mousedev: PS/2 mouse device common for all mice
[    2.769806] i2c-core: driver [isl29023] using legacy suspend method
[    2.776239] i2c-core: driver [isl29023] using legacy resume method
[    2.783040] i2c /dev entries driver
[    2.787173] Linux video capture interface: v2.00
[    2.792284] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
[    2.799924] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
[    2.807737] usbcore: registered new interface driver uvcvideo
[    2.813643] USB Video Class driver (v1.1.0)
[    2.818027] i2c-core: driver [mag3110] using legacy suspend method
[    2.824378] i2c-core: driver [mag3110] using legacy resume method
[    2.830807] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
[    2.839081] Bluetooth: Virtual HCI driver ver 1.3
[    2.844028] Bluetooth: HCI UART driver ver 2.2
[    2.848627] Bluetooth: HCI H4 protocol initialized
[    2.853512] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    2.859369] usbcore: registered new interface driver btusb
[    2.865170] cpuidle: using governor ladder
[    2.869351] cpuidle: using governor menu
[    2.873559] sdhci: Secure Digital Host Controller Interface driver
[    2.879821] sdhci: Copyright(c) Pierre Ossman
[    2.881109] usb 2-1: new low speed USB device number 2 using fsl-ehci
[    2.890949] sdhci sdhci-esdhc-imx.2: no write-protect pin available!
[    2.897522] _regulator_get: sdhci-esdhc-imx.2 supply vmmc not found, using dummy regulator
[    2.906141] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
[    2.914344] _regulator_get: sdhci-esdhc-imx.1 supply vmmc not found, using dummy regulator
[    2.929066] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
[    2.936257] sdhci sdhci-esdhc-imx.0: no write-protect pin available!
[    2.951485] _regulator_get: sdhci-esdhc-imx.0 supply vmmc not found, using dummy regulator
[    2.962125] mmc2: SDHCI controller on platform [sdhci-esdhc-imx.0] using DMA
[    2.969517] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[    2.978762] VPU initialized
[    2.982567] mxc_asrc registered
[    2.986026] Galcore version 4.6.9.9754
[    3.018031] revserved_memory_account:viv_gpu registerd
[    3.023881] Thermal calibration data is 0x58e4ff69
[    3.028824] Thermal sensor with ratio = 184
[    3.051095] Anatop Thermal registered as thermal_zone0
[    3.056544] anatop_thermal_probe: default cooling device is cpufreq!
[    3.067028] input: PixArt USB Optical Mouse as /devices/platform/fsl-ehci.1/usb2/2-1/2-1:1.0/input/input0
[    3.085377] generic-usb 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-fsl-ehci.1-1/input0
[    3.097721] usbcore: registered new interface driver usbhid
[    3.103503] usbhid: USB HID core driver
[    3.110806] logger: created 256K log 'log_main'
[    3.115632] logger: created 256K log 'log_events'
[    3.120670] logger: created 256K log 'log_radio'
[    3.125572] logger: created 256K log 'log_system'
[    3.130711] zram: num_devices not specified. Using default: 1
[    3.136601] zram: Creating 1 devices ...
[    3.141559] usbcore: registered new interface driver snd-usb-audio
[    3.148495] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
[    3.154015] mxc_spdif mxc_spdif.0: MXC SPDIF Audio
[    3.158986] mmc0: host does not support reading read-only switch. assuming write-enable.
[    3.173460] _regulator_get: 1-000a supply VDDD not found, using dummy regulator
[    3.200308] sgtl5000 1-000a: sgtl5000 revision 17
[    3.209312] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal
[    3.223549] mmc0: new high speed SDHC card at address aaaa
[    3.229864] mmcblk0: mmc0:aaaa SS16G 14.8 GiB
[    3.255868] asoc: sgtl5000 <-> imx-ssi.1 mapping ok
[    3.260970]  mmcblk0: p1 p2 p3 < p5 p6 p7 p8 > p4
[    3.263794] asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok
[    3.265941] asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
[    3.266431] ALSA device list:
[    3.266439]   #0: sgtl5000-audio
[    3.266444]   #1: imx-spdif
[    3.266450]   #2: imx-hdmi-soc
[    3.266572] GACT probability NOT on
[    3.266584] Mirror/redirect action on
[    3.266592] u32 classifier
[    3.266596]     Actions configured
[    3.266604] Netfilter messages via NETLINK v0.30.
[    3.266655] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.267505] ctnetlink v0.93: registering with nfnetlink.
[    3.267547] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.267555] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.268130] xt_time: kernel timezone is -0000
[    3.268901] IPv4 over IPv4 tunneling driver
[    3.269966] GRE over IPv4 demultiplexor driver
[    3.270701] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.270854] arp_tables: (C) 2002 David S. Miller
[    3.270908] TCP cubic registered
[    3.272066] NET: Registered protocol family 10
[    3.276340] Mobile IPv6
[    3.276376] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.276609] IPv6 over IPv4 tunneling driver
[    3.281249] NET: Registered protocol family 17
[    3.281284] NET: Registered protocol family 15
[    3.281291] can: controller area network core (rev 20090105 abi 8)
[    3.281385] NET: Registered protocol family 29
[    3.281396] can: raw protocol (rev 20090105)
[    3.281404] can: broadcast manager protocol (rev 20090105 t)
[    3.281486] Bluetooth: RFCOMM TTY layer initialized
[    3.281498] Bluetooth: RFCOMM socket layer initialized
[    3.281505] Bluetooth: RFCOMM ver 1.11
[    3.281513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.281520] Bluetooth: BNEP filters: protocol multicast
[    3.281529] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.281737] L2TP core driver, V2.0
[    3.281765] PPPoL2TP kernel driver, V2.0
[    3.281772] L2TP IP encapsulation support (L2TPv3)
[    3.281997] L2TP netlink interface
[    3.282023] L2TP ethernet pseudowire support (L2TPv3)
[    3.282030] lib80211: common routines for IEEE802.11 drivers
[    3.282039] lib80211_crypt: registered algorithm 'NULL'
[    3.282046] Registering the dns_resolver key type
[    3.474445] VFP support v0.3:
[    3.474730] mmcblk0: p4 size 28641280 extends beyond EOD, truncated
[    3.484113] implementor 41 architecture 3 part 30 variant 9 rev 4
[    3.490291] ThumbEE CPU extension supported.
[    3.495135] Bus freq driver module loaded
[    3.499233] Bus freq driver Enabled
[    3.502872] mxc_dvfs_core_probe
[    3.506409] USB Gadget resume begins
[    3.510068] fsl_udc_resume, Wait for wakeup thread finishes
[    3.511315] DVFS driver module loaded
[    3.511946] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    3.526081] Freeing init memory: 228K
[    4.036738] init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
[    4.044163] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    4.072684] init: cannot find '/system/bin/ingsvcd', disabling 'ing'
[    4.079293] android_usb: already disabled
[    4.083712] mtp_bind_config
[    4.086612] adb_bind_config
[    4.091494] adb_open
[    4.692858] mmc1: new high speed SDIO card at address 0001
root@android:/ # [   16.201081] mmc0: Timeout waiting for hardware interrupt.
[   16.201092] mmc1: Timeout waiting for hardware interrupt.
[   16.201103] sdhci: =========== REGISTER DUMP (mmc1)===========
[   16.201116] sdhci: Sys addr: 0x66380000 | Version:  0x00000002
[   16.201125] sdhci: Blk size: 0x00000004 | Blk cnt:  0x00000001
[   16.201136] sdhci: Argument: 0x95404804 | Trn mode: 0x00000000
[   16.201147] sdhci: Present:  0xfff98088 | Host ctl: 0x00000003
[   16.201155] sdhci: Power:    0x0000000d | Blk gap:  0x00000000
[   16.201164] sdhci: Wake-up:  0x00000000 | Clock:    0x0000003f
[   16.201174] sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
[   16.201184] sdhci: Int enab: 0x107f000b | Sig enab: 0x107f000b
[   16.201194] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
[   16.201203] sdhci: Caps:     0x07eb0000 | Caps_1:   0x00000007
[   16.201213] sdhci: Cmd:      0x0000353a | Max curr: 0x00ffffff
[   16.201221] sdhci: Host ctl2: 0x00000001
[   16.201227] sdhci: ===========================================
[   16.294324] sdhci: =========== REGISTER DUMP (mmc0)===========
[   16.300278] sdhci: Sys addr: 0x66e04000 | Version:  0x00000002
[   16.306337] sdhci: Blk size: 0x00000200 | Blk cnt:  0x00000000
[   16.312292] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[   16.318349] sdhci: Present:  0xfffd8088 | Host ctl: 0x00000003
[   16.324296] sdhci: Power:    0x0000000d | Blk gap:  0x00000000
[   16.330350] sdhci: Wake-up:  0x00000000 | Clock:    0x0000003f
[   16.336308] sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
[   16.342359] sdhci: Int enab: 0x107f000b | Sig enab: 0x107f000b
[   16.348312] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000003
[   16.354360] sdhci: Caps:     0x07eb0000 | Caps_1:   0x00000007
[   16.360312] sdhci: Cmd:      0x00000c1b | Max curr: 0x00ffffff
[   16.366366] sdhci: Host ctl2: 0x00000001
[   16.370410] sdhci: ===========================================
[  304.081085] EXT4-fs (mmcblk0p5): error count: 26
[  304.085829] EXT4-fs (mmcblk0p5): initial error at 1412751426: ext4_map_blocks:596: inode 8: block 139317
[  304.095926] EXT4-fs (mmcblk0p5): last error at 1412753438: ext4_put_super:791: inode 2: block 139317

i search related to 'EXT4-fs (mmcblk0p5): error count: 26', filesystem is corrupted or something like that.
I didnt understand when i follow given Readme steps without editing source code given in tar.xz, how i got problems?
i posted google groups also same question yesterday with giving log which generated by make command to verify is it ok or not?
Really confusing for fresher in kernel.
khiremandar
 
Posts: 86
Joined: Wed Sep 03, 2014 11:38 am

Re: Android source build...What next?

Postby omid » Wed Oct 08, 2014 8:35 pm

Are you gonna use HDMI or lcd ? vlcd ? make sure to select a right uEnv I mean go to /wand-4.3/settings and see all the uboot arguments and select the one that you want to use ,
I really can not say anything more because I am not expert like you :)
I hope you find the solution soon
omid
 
Posts: 19
Joined: Fri Sep 12, 2014 5:13 pm

Re: Android source build...What next?

Postby khiremandar » Thu Oct 09, 2014 1:12 pm

Thanks omid,
I reinstall Android 4.3 by using steps which previously posted by me.
I made mistake last time installation at last command.
You told me that use
sudo dd if=wand-4.3/out/target/product/wandboard/system.img of=/dev/sdb5 && sudo sync
When i seen media folder after reattaching SD card to computer, it shows one partition named as '57f8f4bc-abf4-655f-bf67-946fc0f9f25b'
so i changed it to 'system' & then put sd card in wandboard. Then i got nothing on screen.


Today i make blank unallocated SD card & follow same steps. but this time after completing i not change name of partition & use it in to wandboard.
& it works.
I run simple Hello World program also by android studio.
Thanks.
Now new questions arrises by comparing Android which precompiled & which is compiled by me.
That will questions i will post as new questions.
Here i post what steps i follow for reference:-
sudo dd if=/dev/zero of=/dev/sdb bs=1M count=1
sudo ./wand_fsl_sdcard-part.sh /dev/sdb
dd if=wand-4.3/bootable/bootloader/uboot-imx/SPL of=/dev/sdb bs=1K seek=1
//Remove SD card reader & reattach it.
//Cross verify in dev that sdb is there or not.
mkdir -p /media/androiddev/imx6/boot
cp wand-4.3/kernel_imx/arch/arm/boot/uImage /media/androiddev/imx6/boot/
cp wand-4.3/bootable/bootloader/uboot-imx/u-boot.img /media/androiddev/imx6/boot/
cp wand-4.3/bootable/bootloader/uboot-imx/out.bmp.gz /media/androiddev/imx6/boot/
cp wand-4.3/bootable/bootloader/uboot-imx/uEnv.txt /media/androiddev/imx6/boot/
mkimage -A arm -O linux -T ramdisk -C none -a 0x10800800 -n "Android Root Filesystem" -d wand-4.3/out/target/product/wandboard/ramdisk.img /media/androiddev/imx6/boot/uramdisk.img
sudo dd if=wand-4.3/out/target/product/wandboard/system.img of=/dev/sdb5 && sudo sync
// it take more than 20 min
sudo umount /dev/sdb*
//cross verify all partitions of SD card unmounted or not.

This exercise will help for others also.
khiremandar
 
Posts: 86
Joined: Wed Sep 03, 2014 11:38 am

Re: Android source build...What next?

Postby Arminda774 » Thu Jul 06, 2017 10:51 am

collection of video clip streaming however mobdro premium apk whenever as well as anywhere you desire to see them.
Arminda774
 
Posts: 1
Joined: Thu Jul 06, 2017 10:50 am

Re: Android source build...What next?

Postby ravansranu09 » Sat Jul 15, 2017 6:22 am

AOSP cannot be used from pure source code only and requires additional hardware-related proprietary libraries to run, such as for hardware graphics acceleration. See the sections below for download links and Device binaries requirements for additional resources.
ravansranu09
 
Posts: 1
Joined: Sat Jul 15, 2017 6:20 am

Download IPTV app.

Postby jockson8323 » Sat Sep 09, 2017 10:27 am

Thank you, Awesome stream the latest Movies from IPTV Android and install with Iptvdownload.com for Android, iOS, Windows.
jockson8323
 
Posts: 1
Joined: Sat Sep 09, 2017 10:24 am

Re: Android source build...What next?

Postby rangrocks1 » Sat May 05, 2018 7:12 am

Much more exiting information feed on showbox application to watch new movies online. http://downloadshowboxpc.com we have the best information about ad free showbox app.
rangrocks1
 
Posts: 2
Joined: Sat May 05, 2018 7:10 am

Downlaod free apps

Postby rangrocks1 » Sat May 05, 2018 7:15 am

One of the best way to get into start of android apps on your device http://letsmakeof.com/
rangrocks1
 
Posts: 2
Joined: Sat May 05, 2018 7:10 am

Previous

Return to Software - Android

Who is online

Users browsing this forum: No registered users and 4 guests

cron