Discuss Android on the Wandboard, as well as app development for or on the Wandboard.
My Android system with a 4.4.2 kernel fails to boot into a stable state where adb could be used.
Could I redirect somehow a kernel output to get it via minicom and usb?
For example, now in kernel command line I have: "console=ttymxc0,115200"
But no any device /dev/tttymxc0 is created on my PC even so usb cable is connected.
Would it work if I change it to /dev/ttyUSB0 or what should I do to see kernel output immediately?
- Posts: 11
- Joined: Mon Jun 01, 2015 4:00 pm
On the wandboard there is a DB9 connector, the kernel output is sent there.
You need to connect a serial port
configured to 115200 Baud, 8N1 (8Bits, No parity , 1 stop bit)
The /dev/ttymxc0 device is on the wandboard not your PC.
- Posts: 41
- Joined: Mon Feb 16, 2015 3:42 pm
Return to Software - Android
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 10 guests